Call 08048956038 87% Response Rate

Send Email

Pharma Pallet Making Machine

We manufacture Pharmaceutical Pellet Making Machine

1. Extruder
2. Spheroniser
3. Fluid Bed Processor for bottom and top spray for pellet and granules

Riddhi 130 Die & Roller Type  Xtruder GMP Model Machine
  • Riddhi 130 Die & Roller Type  Xtruder GMP Model Machine
  • Riddhi 130 Die & Roller Type  Xtruder GMP Model Machine
  • Riddhi 130 Die & Roller Type  Xtruder GMP Model Machine
  • Riddhi 130 Die & Roller Type  Xtruder GMP Model Machine
  • Riddhi 130 Die & Roller Type  Xtruder GMP Model Machine
  • Riddhi 130 Die & Roller Type  Xtruder GMP Model Machine

Riddhi 130 Die & Roller Type Xtruder GMP Model Machine

Product Price: Rs 9.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 3 Unit

Product Brochure

Product Details:
Model Number/NameRDET
Voltage440 VOLTS
Automation GradeAutomatic

·         PURPOSE :

To convert mixed dough to fixed diameter extrudes / needles.

 ·         FUNCTION :

RIDDHI Xtruder has two major parts one is the Die roller of required size, and the other is pressuring (Knurling) roller, needles coming out of the extruder are cut into definite length by the cutter. The size of the Die roller can vary from Ø2 – Ø5mm. For conversion of needles i.e. into spherical spheres/pellets a Spheroidizer needs to be used in conjunction with the extruder.




 Model No.: RDXT – 130 GMP
Type : Die Roller Type (Knurling & Die Roller)

Minimum capacity: 2.5 Kgs. / batch

 Maximum capacity: 200 - 300 Kgs./hr. output on continuous basis.
Contact Parts: S.S. 316.

 Non-Contact parts: S.S. 304 covered / cladded.

 Finish: Dull matt finish from outside & internal parts mirror polished.
Main Motor: 7.5 H.P. / 1400 RPM / 3 φ Non FLP Type.  



 The main body is machined, it is constructed in S.S. 304, covered / Cladded. Its main purpose is to hold the extrusion assemblies, motor, gear box and controls for material processing. The body is of table-top design a appropriate table needs to be constructed for installation of the equipment.


 Material of construction of all parts and material use for sub-assemblies:

 1.1 Die roller                                                    - S.S. 316. 

 1.2 Knurling roller / Pressuring roller               - S.S. 316. 
1.3 Cutter / Scrapper blade                            - S.S. 316.
1.4 The assembly is rigidly closed and easy for operation.
1.5 Bearings are isolated with Teflon gaskets, so that do not come in contact with product.
1.6 All gaskets in Food grade rubber.



Get Best QuoteRequest A Callback
  • Spheronizer
  • Spheronizer
  • Spheronizer
  • Spheronizer
  • Spheronizer
  • Spheronizer


Product Price: Rs 2.5 Lakh / pieceGet Best Price

Minimum Order Quantity: 3 piece

Product Brochure

Product Details:
Capacity100 grams to 60 kgs
Design TypeStandard
Used Inmaking pharma pellets with extruder
Spheronizer or Spherodizer

For making of Pharma pellet you have to pass your product through Extruder and after then Spheronizer or spherodizer to make round spherical pellets. Used in Pharma for sustained release tablet.

Technical Offer
The machine consists of a round disc with a vertical shaft spinning at high speed at the bottom of cylindrical chamber. The cylindrical drum is called bowl and the spinning disc is called a friction plate. The friction plate has a groove pattern to increase the friction with the product. When the extrudes are charged into the spherodizer, they ate thrown to the end of spinning plate by centrifugal forces. By the contact with the plate, the extrudes are cut into short cylindrical segments which are gradually rounded by the collisions with the drum wall and the plate probabilities of fines generated during the process is there, these fines will adhere on the surface of the spheres again they can get under the friction plate, through the gap between the plate and the wall. The fines generated under the friction plate will be discharged from the machine by means of a propeller after a certain retention time, the particles have obtained the desired spherical shape, then the discharge is via centrifugal force.The on going action of particles colliding with the wall and being the thrown back to the inside of the plate creates a rope movement of the product along the wall. The continuous collision of granules with the wall and the friction plate will gradually turn cylindrical, is essential for optimum spheronosation. The extrudes from the extruder are converted into spherical beeds due to the centrifugal force created by the high speed rotation of plate. The gap between the chequered plate and drum is reduced to minimum to avoid powders from falling down & beeds being crushed during the Spher'oidization process. The RPM of Spher'oidizer and choosing correct plate with proper formulation are the key factors. Each extrudate that comes in contact with the chequered plate, in then broken in length to its diameter, due to the tumbling & rope effect of the beads get converted into spheres. Compressed connection is provided to facilitate rope formation and avoid crushing of pellets.

Technical Specifications

Per batch
Motor HPCompressed
Dimension in
mm LxBxW
Approx. Capacity (Kg/hr./Operation)

Additional Information:

  • Item Code: RDS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Jnpt Sea Port
  • Production Capacity: INSTANT
  • Delivery Time: 6-8 weeks
  • Packaging Details: sea worthy packing
Get Best QuoteRequest A Callback


Contact Us
Thank youYour Enquiry has been sent successfully.
© Riddhi Pharma Machinery Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.